 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoway TRSL-9340WG / TRSL-9340AWG FEATURES l l l l l l l l l TRSL-9340WG 1 *********************************************************************************************************************************************************************** 3.3V / 1550 nm / 2.5 Gbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** DESCRIPTION l l l l l l l l l Duplex LC Single Mode Transceiver SONET OC-48 IR / SDH STM-16 (S-16.2) Compliant Compliant with Fiber Channel 2X/1X SM-LC-L FC-PI Compliant with IEEE 802.3z Gigabit Ethernet Multi-sourced 2X10 SFF Package Style 1550 nm DFB LD Transmitter 18 dB Link Power Budget At Least 40 km Link Distance at Least Analog Monitor Function -- Transmitter Laser Bias Current -- Transmitter Laser Optical Power Monitor -- Receiver Photo Detector Current AC/AC Coupled Signal Input / Output LVPECL Signal Input / Output LVTTL Signal Detection Output Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operation : TRSL-9340WG -20 to 85oC Operation : TRSL-9340AWG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant The TRSL-9340WG series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-48 IR / SDH STM-16 (S-16.2), IEEE 802.3z Gigabit Ethernet and 1X/2X Fiber channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. A guaranteed minimum optical link budget of 18 dB is offered which can correspond to a link distance of over 40 km (assuming worst case fiber loss of 0.3 dB/km). The transmitter section uses a multiple quantum well 1550 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug APPLICATIONS l ATM Switches and Routers l SONET / SDH Switch Infrastructure l XDSL Applications ORDER INFORMATION P/No. TRSL-9340WG TRSL-9340AWG Bit Rate (Mb/s) 2488 2488 SONET /SDH IR-2/S-16.2 IR-2/S-16.2 Distance (km) 40 40 Wavelength Package (nm) 1550 DFB 2X10 LC 1550 DFB 2X10 LC Temp. TX Power RX Sens. RoHS (oC) (dBm) (dBm) Compliant 0 to 70 3 to -2 -20 Yes -20 to 85 3 to -2 -20 Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -20 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C o Notes TRSL-9340WG TRSL-9340AWG 10 seconds on leads only C V V mA Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Symbol Vcc Topr Min 3.13 0 -20 622 Typ 3.3 Max 3.47 70 85 2700 Units / Notes V o C / TRSL-9440WG o C / TRSL-9440AWG air flow 1m/sec Mb/s Data Rate 2488 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V) TRSL-9340WG 2 *********************************************************************************************************************************************************************** Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -2 --3 dBm 1 Output Center Wavelength 1480 1550 1580 nm Output Spectrum Width ----1 nm -20 dB Width Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 8.2 ----dB Output Eye Compliant with Bellcore GR-253-GORE and ITU-T Recommendation G.957 Optical Rise Time tr 150 ps 20% to 80% Values Optical Fall Time tf 150 ps 20% to 80% Values Relative Intensity Noise RIN -120 dB/Hz Electrical Power Supply Current Icc 180 mA 2 Data Input Current - Low IIL -350 A Data Input Current - High IIH 350 A Differential Input Voltage VIH - V IL 300 1600 mV Data Input Voltage - Low VIL - V CC -2.0 -1.58 V 3 Data Input Voltage -- High VIH - V CC -1.1 -0.74 V 3 TX Disable Input Voltage - Low TDIS 0 0.5 V TX Disable Input Voltage - High TDIS 2.0 Vcc V TX Disable Assert Time T ASSERT 10 s TX Disable Deassert Time TDEASSERT 50 s Notes: 1. Output power is power coupled into a 9/125 m single mode fiber. 2. Maximum current is specified at Vcc = Maximum @ maximum temperature. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Sensitivity @ 2.488 Gbps Sensitivity @ 1.25 Gbps Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal Detect -- Hysteresis Wavelength of Operation Electrical Power Supply Current Data Output Voltage - Low Data Output Voltage - High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Sen1 Sen2 Pin Pa Pd Min --0 ---35 1.0 1100 Typ Max -20 -22 ---20 --4.0 1600 140 -1.58 -0.74 0.8 Vcc+0.3 Units dBm dBm dBm dBm dBm dB nm mA V V V V Notes 1 2 Transition: low to high Transition: high to low --------110 Icc VOL - VCC VOH - VCC VSDL VSDH -2.0 -1.1 0 2.0 3 3 Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 2 23-1 PRBS. 2. Minimum sensitivity and saturation levels at BER=1E-12 for a 2 7-1 PRBS. 3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0 Optoway ANALOG DIAGNOSTICS FUNCTIONS Parameter Symbol Transmitter Laser Bias Current Monitor Bmon+, BmonMonitor Photodiode Current Monitor Pmon+,PmonReceiver Received Photocurrent Rpd Photodiode Responsivity R Applied Voltage at VpdR pin Vpd Min 0 0 0 0.5 2.4 Typ Max Vcc Vcc 1 1.0 Vcc Units V V mA A/W V TRSL-9340WG Notes 1 2 3 3 3 *********************************************************************************************************************************************************************** 0.9 Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following formula: Ibias = V (Bmon+ - Bmon-) / 10 . See below the equivalent circuit. 2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the following formula: Imon = V (Pmon+ - Pon-) / 200. See below the equivalent circuit. 3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified above. The received power is given by the photocurrent multiplied by the photodiode responsivity. VCC VCC LD Monitor PD Vpdr BM+ I bias 3K 10ohm 3K I mon 3K 200ohm Pmon+ RX PD I pd Pmon- BM- 3K bias circuit control circuit T I Analog Monitoring Function Connections *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0 Optoway CONNECTION DIAGRAM TRSL-9340WG 4 *********************************************************************************************************************************************************************** PIN Symbol Notes PIN Symbol Notes 1 VpdR Receiver power monitor. This pin must be 11 connected to a positive power supply (Vcc), preferably via a small resistor. Supplier photocurrent and maybe used to monitor receiver power. Receiver ground. 12 Receiver ground. 13 No connected No connected Receiver ground. +3.3V dc receiver power supply Signal detect. Logic 1 indicate a normal operation. Receiver Dataout Bar Receiver Dataout VccT +3.3V dc transmitter power supply 2 3 4 5 6 7 8 9 10 MS VeeR VeeR NC NC VeeR VccR SD RD- RD+ MS VeeT Transmitter ground. T Dis Transmitter Disable. Connect this pin to logic "1" TD + TD - VeeT Bmon- Bmon+ PmonPmon+ to disable module. To enable module connect to logic low "0" Transmitter Data In Transmitter Data In Bar Transmitter ground. Laser Bias Monitoring - Negative End Laser Bias Monitoring - Positive End (Bmon+ - Bmon-) = 10 X laser bias current Laser Power Monitoring -- Negative end Laser Power Monitoring -- Positive end (Pmon+ - Pmon-) = 200 X monitor photdiode current 14 15 16 17 18 19 20 Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V MICROSTRIP5 Tdis(LVTTL) BmonBmon+ PmonPmon+ 1uH 20 19 18 17 16 15 14 13 12 11 C2 100nF L1 1uH L2 TDLVPECL TD+ Z=50R MICROSTRIP6 Z=5OR VCC3.3V TX RX VpdR VeeRX VeeRX NC NC VeeRX VccRX SD RDRD+ Pmon+ PmonBmon+ BmonVeeTX TDTD+ Tdis VeeTX VccTX C3 100nF C4 10uF PHY DEVICE C1 1 2 3 4 5 6 7 8 9 10 100nF C8 10uF RD+ Vcc3.3V R14 200R VCCRX(3.3V) 10nF Z=50R MICROSTRIP8 Z=5OR SD MICROSTRIP7 100R LVPECL RD- 3K Vpdr TO LVTTL STAGE Note: 1. TX input is terminated inside the module. 2. Veer and Veet are not internally connected to each other. 3. 50 line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0 Optoway PACKAGE DIAGRAM Units in mm TRSL-9340WG 5 *********************************************************************************************************************************************************************** 1) Standard Case TRSL-9340WG / TRSL-9340AWG 2) Extended Case TRSL-9340WEG / TRSL-9340AWEG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0 |
Price & Availability of TRSL-9340WG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |